LEAN AUDIO No.1 for PA Loudspeakers, Guitar Speakers, Bass Guitar Speakers & HI FI speakers

Matrix XT6000G Power Amplifier x2 Channels 3000watt @ 2ohm


Call for Price

Designed and built in the UK

The 2 ohm capable Matrix XT6000G, class G amplifier is optimised for high power transfer efficiency and offers unbeatable performance in a lightweight and compact 2U package. The Matrix XT6000G offers 3000 watts per channel coupled with the legendary Matrix sound quality and reliability, these amplifiers represent incredible value for money. Optimised for high power sub-woofer arrays, however they may also be used for mid-tops. These amplifiers are also capable of delivering up to 6000W of tight, controlled finesse in bridged mode. All from a package weighing just 8.6kg. Unbeatable performance at an unbeatable price.

The Matrix XT6000G is a 2U lightweight two-channel class G amplifier and use our state of the art Switched-Mode Power Supply technology. Our unique class G MOSFET output stage ensures the output transistors can make the most of their power supply, delivering huge current output and unrivalled control of the loudspeaker cone. The Class G topology is used in these models to maximse amplification efficiency, with minimal power wastage; allowing higher powers demanded particularly by modern subwoofer instillations to be neatly contained in such a small and light package.

Extensive protection circuitry ensures the amplifier is protected from loudspeaker short-circuits and mis-wiring. This is completely transparent to the audio signal, and, unlike almost all other forms of amplifier protection, will not affect the sound quality of the amplifier in any way while it is operating within specification.

Cooling is made more efficient with our unique turbulated heatsink design, forced-air cooled with two dual speed temperature controlled 80mm long-life fans. Low thermal mass keeps the amplifier weight down and gets the heat out quickly. Cold air is sucked in from the front, and exhausted at the back. The amplifier has fully balanced XLR inputs and Neutrik Speakon® NL4 output sockets and is connected to the mains by a fused Powercon inlet.


Price includes VAT.


Number of channels

2
Power Output RMS 2ohm 3000W Per Channel
Power Output RMS 4ohm

2100W Per Channel
Power Output RMS 8ohm 1600w Per Channel
Power Output Bridged Mode 8ohm 4200w
Power Output Bridged Mode 4ohm 6000w
Supply Voltage

230V ±15%
Average Supply Current, Full load
29A
Mains Connector

32A POWERCON
Frequency Response (±3dB ref 1kHz) 8Hz - 24kHz
Signal to Noise Ratio (ref full power, 1kHz) 102dB
THD (1kHz, full power) 0.09%
THD (20Hz - 20kHz, full power) <0.2%
Slew Rate 69V/µs
Damping Factor (ref. 8R, 100Hz)
>700
Cooling (Temperature Controlled Dual Speed Fan)

2x 80mm Fan
Cooling Direction Front to Back
Dimensions, mm 482 x 88 x 400
Weight 8.6kg


  • 1 Units in Stock