LEAN AUDIO No.1 for PA Loudspeakers, Guitar Speakers, Bass Guitar Speakers & HI FI speakers

18 Sound 12NCX750 12" 1.4" High Performance Coaxial

£426.63

Quantity:

Eigtheen Sound 12NCX750 12" 1.4"Coaxial speaker 8ohm
The 18 sound 12NCX750 is a 12" neodymium coaxial transducer designed for use in compact reflex enclosures and stage monitors as small as 40 lt with a nominal dispersion of 80 degrees. The curvilinear profile LF cone provides smooth response within its intended frequency range thanks to its high damping pulp composition.

■97dB LF / 106.5dB HF SPL 1W/1m average sensitivity
■Single magnet neodymium motor
■800W LF - 240W HF maximum program power handling
■ 75 mm (3") LF Interleaved Sandwich Voice coil (ISV)
■ Aluminum demodulating ring (SDR) for minimum LF distortion
■60 mm (2.4") HF Titanium diaphragm
■Edge-wound Aluminum ribbon HF voice coil (EWAL)
■HF copper sleeve for reduced distortion and higher output
■80 degrees nominal conical dispersion
■Suitable for very compact enclosures and stage monitor

LF General Specifications

Nominal Diameter
300 mm (12 in)
Rated Impedance
8 Ohm
AES Power
400 W
Program Power
800 W
Peak Power
1600 W
Sensitivity
97 dB
Frequency Range
60 ÷ 5000 Hz
Power Compression
@-10dB 0,9 dB
Power Compression
@-3dB 2,8 dB
Power Compression
@0dB 4,2 dB
Max Recomm. Frequency
1800 Hz
Recomm. Enclosure Volume
40 ÷ 90 lt. (1,41 ÷ 3,18 cuft)
Minimum Impedance
6,4 Ohm at 25°C
Max Peak To Peak Excursion
27 mm (1.06 in)
Voice Coil Diameter
75 mm (3 in)
Voice Coil Winding
Material copper
Suspension M roll, polycotto
n
Cone
Curvilinear, Water repellent, High damping pulp

HF General Specifications

D.C. Resistance
6,1 Ohm
Continuous Power
120W above 1,1 kHz
Max. program power
240W above 1,1 kHz
Sensitivity
107 dB
Frequency Range
0.9 ÷ 18 kHz
Min Xover Frequency
1.1 kHz
Voice Coil Diameter
60 mm (2.4 in)

Overall diameter 310 mm (12.20 in)
N. of mounting holes and bolt
8 Mounting holes diameter 5.9 mm (0,23 in)
Bolt circle diameter
295 mm (11.61 in)
Front mount baffle cutout
ø 280 mm (11 in)
Rear mount baffle cutout
ø 280 mm (11 in)
Total depth
148 mm (5.85 in)
Flange and gasket thickness
14 mm (0,55 in)
Net weight
4,7 kg (10,36 lb)
Shipping weight
5,2 kg (11,46 lb)
CardBoard Packaging dimensions
332 x 332 x 184 mm (13.07 x 13.07 x 7.24 in)

The 12NCX750 is a 12" neodymium coaxial transducer designed for use in compact reflex enclosures and stage monitors as small as 40 lt with a nominal dispersion of 80 degrees.

The curvilinear profile LF cone provides smooth response within its intended frequency range thanks to its high damping pulp composition.
The 75mm (3in) LF copper voice coil employs Interleaved Sandwich Voice coil (ISV) technology, in which a high strength former carries windings on both the outer and inner surfaces. This results in a balanced coil with a uniform distribution of mass and motive energy and an extremely linear motor assembly.

The low distortion and sound quality are further improved by an aluminum demodulating ring (SDR technology) that flatten LF impedance and phase with constant power transfer.

Equipped with proprietary hybrid radial tangerine phase plug, the integrated HF compression driver has been designed to give smooth coherent wavefront in the horn entrance in all working frequency range with an high level of manufacturing consistency. The phase plug, with its short openings and high flare rate value, assures low distortion and remarkable improvements in mid-high frequency reproduction. A copper sleeve reduces inductance value above 10 kHz, improving phase and impedance linearisation.

The 2.4" diameter HF diaphragm assembly uses a high strength, high temperature treated Nomex voice coil former joined directly to the titanium diaphragm on its upper bend edge, assuring extended frequency energy transfer. This improves linearity and shows unparalleled reliability when compared with a straight former joint.

A specific HF exit profile design has been chosen in order to maximize the cone’s profile coupling. The high force neodymium single magnet structure makes the 12NCX750 a lightweight speaker for its performance class - only 4,7 kg (10.36 lb).

The XO12NCX dedicated passive crosssover filter is offered, making this neo coaxial speaker a ready-to-use transducer system.

Due to the widespread use of high power audio systems at outdoor events, the ability to perform in adverse weather conditions is an additional key feature of the 12NCX750. This has been achieved using exclusive cone and magnet plate treatment processes which increase resistance against corrosion and make the cone water repellent.


Fs 58 Hz
Re 5,4 Ohm
Sd 0,0531 sq.mt. (82.31 sq.in.)
Qms 6.42
Qes 0,31
Qts 0,29
Vas 63 lt. (2.23 cuft)
Mms 48 gr. (0,10 lb)
BL 17,5 Tm
Mathematical Xmax ± 5.5 mm (±0,22 in)
Le (1kHz) 0.62 mH
Half space efficiency 4.8%


Please Choose:



  • 2 Units in Stock