LEAN AUDIO No.1 for PA Loudspeakers, Guitar Speakers, Bass Guitar Speakers & HI FI speakers

BMS 5530ND 8ohm 1" Neodymium HF Comp Driver, 1,75" VC, 80W 113 dB

£118.60

Quantity:

BMS 5530 1" Neodymium high frequency compression driver, 1.75" VC, 80 W AES, 113 dB

Features:


  • Unique Patented Design
  • Neodymium Magnet Assembly
  • 113 dB Sensitivity 1 W / 1 m
  • 1 kHz Crossover
  • Extended high Frequency Response up to 20 kHz
  • Very small Size and low Weight
  • 44.4 mm Sandwich in- and outside Voice Coil
  • 8ohm

The BMS 5530 uses all unique BMS technologies like the ultra-low intermodulation distortion ring diaphragm, very high efficiency and a 44mm sandwich voice coil in an ultra-compact format, the BMS 5530 sets a new standard in size to output ratio and provides the lowest crossover available at that size.

Great new potential
Loudspeaker system designers now can create modern products with no compromise, while reducing size, weight and cost of the driver components.

Unique solution for line arrays and beam steering systems
With an outside diameter of only 72mm the BMS 5530 is a non-compromise solution for high output line arrays when it comes to putting maximum output in minimal height.

When multiple 5530 drivers are closely mounted, the recommended crossover drops to 850Hz.

Because of its small size the BMS 5530 is the only solution to create high output beam steering systems with perfect directivity control, low crossover of 850Hz and 72mm acoustical distance between sources.

Designing better point sources
In fact the recommended crossover is one octave lower than other drivers in this category while the maximum output is 4-6dB higher.

This allows to design high output loudspeaker systems with high fidelity, high resolution sound and perfect directivity while reducing size, weight and cost.

Applications:
- High quality point sources

- High output line arrays

- High output beam steering systems

 


Specifications:


  • Throat diameter: 1" (25.4 mm)
  • Nominal impedance: 8 Ohm
  • Power capacity (AES): 80 W
  • Peak Power: 450 W
  • Sensitivity 1 W / 1 m: 113 dB
  • Max. SPL (cont.): 132 dB at 80 W
  • Frequency Range: 500 - 20000 Hz
  • Recommended Crossover: 1000 Hz
  • Voice Coil Diameter: 1.75" (44.4 mm)
  • Magnet Material: Neodymium
  • Flux Density (Tesla): 2.2
  • Voice Coil Material: Copper Clad Aluminum
  • Voice Coil Former: Kapton TM
  • Diaphragm Material: Polyester

Mounting Information:


  • Overall Diameter: 85 mm
  • Depth: 36 mm
  • Net Weight: 0.83 kg
  • 2 x M5 Holes, 180 on 57.15 mm Diameter
  • 3 x M5 Holes, 120 on 57.15 mm Diameter

Please Choose:



  • 6 Units in Stock