LEAN AUDIO No.1 for PA Loudspeakers, Guitar Speakers, Bass Guitar Speakers & HI FI speakers

Matrix XT1000 1000w Power Amplifier x2 Channels 500watts @ 4ohm

£575.00

Quantity:

Designed and built in the UK

The Matrix XT1000 class AB amplifier offer unbeatable performance in a lightweight and compact 2U package. The Matrix Amplification XT1000 boasts 500 watts per channel and the legendary Matrix sound quality and reliability. Primarily designed for middle ground applications - driving mid-tops, high power tweeter arrays and sub-woofers. This Matrix Amplifier are also capable of delivering up to 1000W of tight, controlled finesse in bridged mode. All from a package weighing just 7.5kg. Unbeatable performance at an unbeatable price.

The XT1000 2U lightweight two-channel class AB amplifier and incorporates the very same Switched-Mode Power Supply technology as used in Matrix's high power class G amplifiers. Matrix's unique class AB MOSFET output stage ensures the output transistors can make the most of their power supply, delivering huge current output and unrivalled control of the loudspeaker cone.

Extensive protection circuitry ensures the amplifier is protected from loudspeaker short-circuits and mis-wiring. This is completely transparent to the audio signal, and, unlike almost all other forms of amplifier protection, will not affect the sound quality of the amplifier in any way while it is operating within specification.

Cooling is made more efficient with Matrix's unique turbulated heatsink design, forced-air cooled with two dual speed temperature controlled 80mm long-life fans. Low thermal mass keeps the amplifier weight down and gets the heat out quickly. Cold air is sucked in from the front, and exhausted at the back. The amplifier has fully balanced XLR inputs and Neutrik Speakon NL4 output sockets, and is connected to the mains by a fused Powercon inlet.


Price includes VAT.


Number of channels

2
Power Output RMS 4ohm

500W Per Channel
Power Output RMS 8ohm 350w Per Channel
Power Output Bridged Mode 8ohm 1000w
Supply Voltage

230V 15%
Average Supply Current, Full load
5A
Mains Connector

20A POWERCON
Frequency Response (3dB ref 1kHz) 8Hz - 24kHz
Signal to Noise Ratio (ref full power, 1kHz) 98dB
THD (1kHz, full power) 0.07%
THD (20Hz - 20kHz, full power) <0.1%
Slew Rate 65V/s
Damping Factor (ref. 8R, 100Hz)
>450
Cooling (Temperature Controlled Dual Speed Fan)

2x 80mm Fan
Cooling Direction Front to Back
Dimensions, mm 482 x 88 x 365
Weight 7.2kg


  • 1 Units in Stock