Description
Celestion AN2075 2 " 20W 8 Ohm Compact Array Loudspeaker
PRICE MATCH AVAILABLE!
email: sales@lean-business.co.uk if you can find a cheaper
price for the Celestion AN2775
Using their market-leading experience in the design of high- performance, small-format professional audio drive units, Celestion has created an all-new range of compact and lightweight loudspeakers that are ideally suited to many sound reinforcement applications.
These drivers have been optimized using Finite Element Analysis (FEA) to give a wider dispersion characteristic than conventional loudspeakers of this size. In addition, they feature a space-efficient square chassis profile allowing them to be positioned more closely to each other for improved coupling.
With Celestion's Compact Array Drivers, systems designers are now able to build into their products some of the principal advantages offered by line array designs: a more even distribution of the acoustic signal and the ability to project sound over greater distances.
•Compact and lightweight, full-range neodymium loudspeakers
•Advanced Finite Element Analysis techniques used for acoustic, mechanical and electromagnetic modelling
•Ideal for applications such as portable line arrays where actively controlled wavefront (beam steering) is used
•Delivers wider dispersion to higher frequencies than many equivalent compact, full-range drivers on the market
•Chassis purpose-designed for maximum free air movement, with square mounting frame to facilitate close coupling of multiple units
•Stiff and light aluminium cone remains rigid to higher frequencies, delivering a smoother response in the critical listening band
•Half roll elastomer surround provides damping for unwanted resonances and sustained centring control at extremes of excursion •Designed to be weather resistant for outdoor applications
note: Price includes VAT
Specification
General Specifications
Nominal diameter 50mm/2in
Power rating 120Wrms
Nominal impedance 8Ω
Sensitivity 80dB
Frequency range160Hz-19kHz
Voice coil diameter 20mm/0.75in
Chassis type Glass reinforced ABS
Magnet type Neodymium
Voice coil material Round Copper
Former material Polyimide
Cone material Aluminium
Surround material Elastomer
Xmax 31.5mm/0.06in
Gap depth 3mm/0.12in
Voice coil winding width 6mm/0.24in
Small Signal Parameters
Sd 12.57cm2/1.94in2
D 40mm/1.57in
Fs 160Hz
Mms 1.37g/0.05oz
Qms 10.12
Qes 1.22
Qts 1.09
Re 5.28Ω
Vas 0.12lt/0.004ft3
BI 2.60Tm
Cms 0.55mm/N
Mounting Information
Overall depth 43.5mm/1.7in
Overall size 56.2 x 56.2mm/2.2in x 2.2in
Cut-out diameter 51.1mm/2.0in
Fitting 4 x M4 holes
Unit weight 97g/3.4oz